radial load sentence in Hindi
Sentences
Mobile
- The latch mechanism has to prevent opening under radial loads of up to hundreds of tons.
- Surrounding the Sleeve is the Bushing, fixed in the Chock, which carries the radial load.
- This bearing incorporates a 45?contact angle that enables the bearing to support large axial loads and moderate radial loads.
- There are also designs with one row of rollers, suitable for lower radial loads and virtually no axial load.
- Roller bearings typically have higher radial load capacity than ball bearings, but a lower capacity and higher friction under axial loads.
- Most spherical roller bearings are designed with two rows of rollers, allowing them to take very heavy radial loads and heavy axial loads.
- This is due to the need to avoid " wedging " of the thread flanks when subjected to radial loads, which would contribute substantially to friction forces and thread wear.
- Compared to square threads, disadvantages of the Acme thread form are lower efficiency due to higher friction and some radial load on the nut ( angular offset from square ).
- If both axial and radial loads are present, they can be added vectorially, to result in total load on bearing, which in combination with nominal maximum load can be used to predict lifespan.
- Principally, the simplest way to accomplish the yaw bearing tasks with gliding elements is with two gliding planes for the axial loads ( top and bottom ) and a radial gliding surface for the radial loads.
- They continue to manufacture the original thrust bearings with the unique V-groove raceway which is designed to reduce rolling friction and can carry larger radial loads than typical thrust bearings in a round groove design.
- However, this type of drum motor design has a limited maximum radial load due to the bending stresses caused by the normal belt tension of a conveyor and is therefore used mainly for small light duty conveyors and loads.
- The line of General Purpose ( GP ) Acme threads ( ASME / ANSI B1.5-1988 ) are not designed to sustain external radial loads and both the nut and bolt are, ideally, independently supported, the nut by a linear guide and the screw by shaft bearings.
- For single-row deep-groove ball bearings, SKF's documentation says that maximum axial load is circa 50 % of maximum radial load, but it also says that " light " and / or " small " bearings can take axial loads that are 25 % of maximum radial load.
- For single-row deep-groove ball bearings, SKF's documentation says that maximum axial load is circa 50 % of maximum radial load, but it also says that " light " and / or " small " bearings can take axial loads that are 25 % of maximum radial load.
- However, there is a centralizing Acme-thread standard ( also specified in ASME / ANSI B1.5-1988 ) which caters to applications where the threads are not radially supported, where the roots and crests of opposing threads are designed to come into contact before the flanks do, under radial loads.
radial load sentences in Hindi. What are the example sentences for radial load? radial load English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.